Common symbols around you

From Helpful
(Redirected from Device labels)
Jump to navigation Jump to search


Electronic devices

Uses, safety

Some mark mentioning RoHS means it's compliant to RoHS



Power supply


basic AC-to-DC adapter specs

The top symbol is for DC barrel plugs, specifying whether the inside or outside is positive.

The middle line is input, where the squiggly tilde ~ indicates AC, here mentioning an input voltage range and frequency it's okay with (these specs amount to worldwide use).

The third line (output)'s solid and dotted line indicates DC.

Power supply type: switch-mode, linear, general/unspecified
"Independent lighting auxiliary" [1] roughly meaning "lighting power supply not built into the luminaire"


LPS (Limited Power Source) have relatively low maximum voltage, current, and power. [2]

SELV (Safety Extra Low Voltage), where the power supply output stays safe under single fault conditions. [3]




File:Fuse symbols.png
Fuses



Transformer (general)

isolating, safety isolating;    non-short-circuit proof, short-circuit proof

separating transformer, output >1kV, variable, constant voltage, perturbation attenuating

There's at least a handful more properties, and a load more combinations of them.

Double circle, like a vertical venn diagram, are transformers, with a handful of properties marked. There are more combinations of all the parts this image shows, and further ones (e.g. construction site).


https://www.electricaltechnology.org/2019/09/transformer-symbols.html



Certifications

Some of the more commonly seen logos / certification bodies include:


Bunch of European certifications

There are actually many more testing centers, that may deal with additional health and/or safety and/or environmental concerns.

You're probably vaguely familiar with logos for your part of the world, even if you don't know what they mean.


Many of these cover similar ground to each other, but not exactly the same, and exist in part because laws and standards are partly country-specific.

Certification marks often represent agreements between manufacturers and (ideally well known) testing centers, so that you don't have to involve all of them to be able to sell everywhere.

Note that there are also logos that do not mean any of these at all.


Whether certification marks are strictly required for sale varies(verify), but even when it isn't it may still be common, for a collection of reasons, like some individuals preferring safety-tested versions for certain products, liability in terms of insurance, varied indirect regulation (e.g. electrical code, fire regulation, medical safety) meaning certain businesses/resellers only buy certified devices, or even just self-imposed regulation like you caring more that your house/business is less likely to burn down.


Some devices are interesting cases. For example, power supplies are often separate from the devices they power, for practical reasons: e.g. when a large company that has locked down the design so that they can mass produce it, for worldwide sale, without a lot of new certification (certifcation is slow, sort of expensive, and may need periodic recertification) - and, separately, simplify the certification for all the brand's devices it may power because the power supply is no longer part of it.

That's also why power supplies have more-than-usual certification marks on them, including ones not required for your area.



CE Mark and the more suspect one

There are also a bunch of fake symbols.

Best known among them is chinese producers just stamping on the european CE mark.

Often with different, tighter spacing, presumably to to have an argument it's not the same. But note that this tighter spacing is also used in some actual CE products, just for space reasons.

This one has been nicknamed "chinese export".


Semi-sorted

Related

A bunch of markings used around mechanisms, indicators, and buttons, around cars, audio, production lines are settled in ISO 7000 / IEC 60417, see e.g. See https://www.iso.org/obp/ui#iso:pub:PUB400008:en


IP ratings for water and object safety


clothing / washing labels

Packaging symbols

Unsorted

https://hackaday.com/2018/02/02/what-are-those-hieroglyphics-on-your-laptop-charger/

https://www.molnlycke.com/product-support/regulatory-support-and-product-information/symbols/

Single use, keep dry, don't use if packaging is damaged

Consumables